This technical data sheet represents our latest knowledge and provides information without assuming any liability.
Store in a dry and clean environment, at room temperature and moderate humidity. The material can be hung in its unopened packaging. Keep away from heat sources and sunlight.
The material should be acclimated to room temperature (approximately 20°C) 72 hours prior to use.
When the above conditions are met, it is recommended to use primed products within 24 months.
PDF
Indoor
Inside / 180 microns
Inside / 180 microns
İçerik
Features
Methods
Values
Thickness
(DIN EN ISO 2286-3)
180 μm ± 10 μm
Color Tolerance
(DIN 53236 (45/0), 1983-01)
ΔE≤ 0.6 ΔL≤ +/-0.35 Δa≤+/- 0.30 Δb≤ +/-0.35
Density
-
≥ 1.3 g/cm³
Tensile Strength
ISO 527-3
Lengthwise: ≥ 25 N
Widthwise: ≥ 25 N
Elongation at Break
ISO 527-3
Lengthwise: ≥ 3 %
Widthwise: ≥ 3 %
Dimensional Stability
DIN 53377
Lengthwise: Max. – 6 %
Widthwise: Max. – 2.4 %
Lightfastness
DIN EN ISO 4892-2 / 105 B 02
TS EN 15187
≥ 6 / Blue Scale
Dyne Pen Test
ASTM D 2578
≥ 30 mN/m
This technical information form represents our most current knowledge and provides information without any obligation.
Store in a dry and clean environment, at room temperature and medium humidity. The material can be hung in its unopened packaging. Keep away from heat sources and sunlight.
The material should be acclimated to room temperature (approximately 20°C) 72 hours before use.
It is recommended to use coated products within 24 months if the above conditions are met.
This technical data sheet represents our most current information and is provided without any obligation.
Store in a dry and clean environment, at room temperature and medium humidity. The material can be hung in unopened packaging. Keep away from heat sources and sunlight.
The material should be acclimated to the environment at room temperature (approximately 20°C) 72 hours before use.
When the above conditions are met, it is recommended to use primer-applied products within 24 months.
PDF
Indoor
Inside / 350 Micron
Inside / 350 Micron
İçerik
Features
Methods
Values
Thickness
(DIN EN ISO 2286-3)
350 μm ± 10 μm
Color Tolerance
(DIN 53236 (45/0), 1983-01)
ΔE≤ 0.6 ΔL≤ +/-0.35 Δa≤ +/- 0.30 Δb≤ +/-0.35
Density
-
≥ 1.3 g/cm³
Tensile Strength
ISO 527-3
Lengthwise: ≥ 80 N
Widthwise: ≥ 60 N
Elongation at Break
ISO 527-3
Lengthwise: ≥ 3 %
Widthwise: ≥ 3 %
Dimensional Stability
80 º C / 10 min
Lengthwise: Max. – 7 %
Light Fastness
DIN EN ISO 4892-2 / 105 B 02
TS EN 15187
≥ 6 / Blue Scale
Dyne Pen Test
ASTM D 2578
≥ 38 mN/m
This technical data sheet represents our latest knowledge and will provide information without any obligation.
Store in a dry and clean environment at moderate room humidity and temperature. The material can be hung in its unopened packaging. Keep away from heat sources and sunlight.
The material should be acclimatized to room temperature (approximately 20°C) 72 hours before use.
When the above conditions are met, it is recommended to use the primer-applied products within 24 months.
PDF
Indoor
Indoor / Glossy
Indoor / Glossy
İçerik
Properties
Methods
Value
Thickness
DIN EN ISO 2286-3
300 μm ± 10 μm
Color Tolerance
X-Rite Ci6x-Ci7 / d65/10º / CIELAB
ΔE*: ≤ 0.8 ΔL*: ±0.4 Δa*: ±0.35 Δb*: ±0.4
Density
-
≥ 1.35 g/cm³
Tensile Strength
ISO 527-3
Longitudinal: ≥ 45 N
Transversal: ≥ 40 N
Elongation at Break
ISO 527-3
Longitudinal: ≥ 20 %
Transversal: ≥ 20 %
Scratch Resistance
TS RN 15186 / DIN EN ISO 68861-4
≤ 0.3 N
Gloss Level
Rhopoint 20 º Gloss Meter
≥ 80 GU
≥ 80 DOI
Light Fastness
DIN EN ISO 4892-2/105 B02
TS EN 15187
≤ 0.6 (Xenon: 200 hr) ΔE*
Scratch Resistance (Pencil Hardness)
TS EN ISO 15184
↑ HB
Adhesion Test (Cross Cut)
ASTM D 3359-17
5 B
Value “0” (No separate)
Dyne Pen Test
ASTM D 2578
36 mN/m
This technical data sheet represents our current knowledge and will inform without any obligation.
Store in a dry and clean environment at moderate humidity and room temperature. The material may remain suspended in unopened packages. Keep away from heat sources and sunlight.
The material should be acclimatized to room temperature (approximately 20°C) 72 hours before use.
When the above conditions are met, it is recommended
PDF
Indoor
Film Palette Size & Dimensions
Film Palette Size & Dimensions
İçerik
Pallet Drawing
Product Code
Roll Size (mm)
Thickness (micron)
Roll Width (mm)
Pallet Dimension (cm)
Rolls in Package
Total Meter (mt)
Total Pallet Weight (kg)
SN-MT
250
200
1430
100X110
12
3000
1008,2
ST
250
200
1430
100X110
9
2250
682,685
SA
250
200
1430
100X110
12
3000
903,62
SN-MT-BS
100
350
1430
100X110
16
1600
1053,27
AS
500
160
12400
100X110
9
4500
1085,28
ST(OUTDOOR)
500
200
680
80X110
6
3000
454,26___
PDF
Outdoor
Outside / 200 Micron
Outside / 200 Micron
İçerik
Properties
Methods
Value
Thickness
(DIN EN ISO 2286-3,1998-07)
200 μm
Thickness of Acrylic Coating
-
≥ 53 μm
Color Tolerances for Unprinted Films
(DIN 53236 (45/0), 1983-01)
ΔE≤ 0.6 ΔL≤ +/-0.35 Δa≤+/- 0.30 Δb≤ +/-0.35
Color Consistency of Printed Films
-
Production and visual evaluation with the original sample.
Weather Resistance
(RAL -GZ 716 /1 , section 1, part 7)
Irradiation of ≥ 20 GJ /m² with Grade 3 in grayscale
Tensile Strength (Longitudinal-Transverse)
DIN EN ISO 527-3
≥ 5 MPa
Elongation at Break
(DIN EN ISO 527-3)
≥ 20 %
Dimensional Stability
(DIN 53377)
Max.-2.5 % (10 minutes, 60°C): Longitudinal direction
Welding
(60 °C- 10 min.)
When profiles are welded according to the manufacturer's instructions, there should be no negative effect on the film. Bending profiles at 130°C may cause surface gloss.
Maintenance
-
Clean with ordinary household cleaners, but not with abrasive machines
Chemical Resistance
-
Resistant to normal household cleaning agents, gasoline, motor oil, olive oil and milk. Not resistant to organic solvents including paint thinners and varnish removers.
This technical data sheet represents the current state of our knowledge and is for information purposes only without any obligation.
Store in a dry and clean environment at moderate humidity and room temperature. Material may hang in unopened packages. Keep away from heat sources and sunlight.
Material should be acclimated to room temperature (approximately 20°C) 72 hours prior to use.
When the above conditions are met, it is recommended to use products with primer applied within 24 months.
PDF
MSDS
Material Safety Data Sheets
Material Safety Data Sheets
İçerik bulunamadı
Are You Ready to Transform Your Space?
Discover how our premium films can upgrade your interior and exterior surfaces.
Privacy and Cookies: This site uses cookies. By continuing to use this website you agree to their use. To find out more, including how to control cookies, see here: